How to use Rainbow Vacuum as Air Purifier

Things you should know about an air purifier

An air purifier is a unit specifically designed to clean the impurities however, there are certainly other alternatives as well. In case, you do not want to have an additional unit for purification, you can use a rainbow vacuum cleaner as it is itself a multifunctional device. Here in this blog, we are sharing some common queries like how to use rainbow vacuum as an air purifier and other related answers. So, let’s get started.

Rainbow Vacuum

You might have heard of a rainbow vacuum, which is a multifunctioning gadget that can do wonders with just a single unit. It alone can clean, sweep and purify the air as well. 

When cleaning, a regular vacuum cleaner uses a bag to filter and collect debris, dust, and grime. A rainbow, on the contrary, is distinguished by the inclusion of a HEPA filtration system in some models. A HEPA filter will assist in capturing even the smallest molecules of dust and pet dander. This is beneficial to people who are suffering from allergies.

How to use rainbow vacuum as air purifier?

The Rainbow vacuum models usually focus on removing dust and smell while also refreshing the air in your house. 

Rainbow vacuums work differently from conventional vacuums in that they gather dirt in a water-filled basin rather than a canister or bag. Rainbow vacuum cleaners, due to their design, require frequent maintenance after each usage to maintain them in working order.

The rainbow vacuum reviews have shown that an original one uses a HEPA filter to purify the air

How often to change the air purifier filter?

The durability of the filters will differ depending on the type you have. Permanent filters do not need to be changed, but they should be cleaned regularly to eliminate any particles that have accumulated.

Several technologies can be used by air purifier filters to capture allergens in your house. Some utilize carbon to attract tiny particles and remove smells in the home, while others use True HEPA to catch even the smallest particles. 

Although it varies based on the individual filter, replaceable HEPA filters must be replaced every 6-12 months, depending on air quality and environmental variables. Depending on the quality of the air, carbon pre-filters should be changed every 3 months.

Do air purifiers help with smell?

The typical fragrances we encounter daily are really airborne chemicals, and many of the aromas are derived from volatile organic molecules (VOCs). 

Some VOCs, such as formaldehyde, can have a variety of negative health consequences. Many hazardous chemicals, however, are odorless, which means that the odors that tickle your nose may be considerably less deadly.

They are caused by chemical molecules in the air that are volatile enough to be detected by your olfactory receptors. The foul odors are not just a nuisance, but they also constitute actual air pollution capable of producing harmful health impacts.

Do air purifiers remove dust and odor?

By eliminating particles that produce odor from the circulation of indoor air, an air purifier may be the answer to some of these unpleasant odors.

However, some air purifiers are more effective than others in removing residual odors. Here’s a look at all the alternatives now accessible to customers, as well as an investigation into the sources of bad scents in your house.

Most scents, pleasant or unpleasant, are caused by receptors in your nose sensing a chemical in the air, a task your nose performs very well—even if you wish it didn’t. Because airborne compounds are typically considerably smaller than many others found in your house, screening them from the air is difficult.

How to reset filtrate air purifier?

After the cleaning process or replacing the filters of your air purifier, here are the steps to reset the air purifier.

Step 1

Pull out the front panel from the unit by grabbing it from the bottom (either left or right) panel and pull the panel out gently.

Step 2

To change the filter of carbon filters or Hepa, you will find only one button. Hold it for a second as it will toggle in between both filters to choose them and reset them.

Step 3

Finally, press and hold the button switch for 3 to 5 seconds, producing a beep sound, and then the light will shut off.